Attitude
Custom Painting's "Double
Dose™" Double
the amount of clear protection for your custom paint
job.
Our
Double Dose ensures the ultimate in gloss and
protection for
your custom paint job.
When
we email you back with an estimate,
the Double Dose™ is not included in the price.
After
spraying the basecoat, your graphics or flame
job is sprayed, thus leaving a hard edge, especially
in candy type paints or jobs with pinstriped outlines..
When
clearing over the graphics, the clear follows
the contour of the surface, thus leaving an
edge, though not as hard of an edge as without
the clear.
Once
wetsanded, the surface is leveled thus leaving
you a nice flat finish ensuring that you will
not feel an edge on the paint's surface. When
wetsanding the surface flat, the higher areas,
where the graphics or flame are, gets thin because
the surface under the paint is higher up.
When
you purchase our "Double Dose, we go ahead
and bypass the wetsanding, and machine sand
the surface down to a flat finish. Then we spray
another 3-4 coats. After this, the surface is
wetsanded, buffed and polished, giving you
the ultimate in depth and protection for
your new paint job.
Cost for our "Double Dose" is $250 for any job that contains three parts
(two fenders and tank or two fenders, tank and side covers).
NOTE: Our Signature Sets already include this in the price of the custom
painted sheet metal set!
